How accurate is the preview against the real siding color once it's installed?

It's built to match the manufacturer's published color and texture as closely as photorealistic rendering allows, and it accounts for the home's actual lighting and shadow in the photo — but paint chips, siding samples, and screens all render color slightly differently than sunlight on a full elevation. We position it as a decision-making tool that gets homeowners close enough to commit with confidence, not a Pantone-exact guarantee, and recommend confirming the final selection against a physical sample before ordering material.

Can it show mixed materials, like board-and-batten gables with lap siding below?

Yes — mixed-material elevations are one of the most common requests, since gable accents, water tables, and material transitions are exactly the details homeowners struggle to picture from a brochure. The tool renders material boundaries onto the home's actual architectural lines.

Does it work for stone veneer and masonry accents, or just siding panels?

It handles stone veneer, brick, and masonry accent walls the same way it handles siding material — applied to the actual elevation photo, including realistic mortar lines and stone coursing, so homeowners can see accent placement (porch columns, foundation wrap, chimney chase) before committing to the added cost.

What if the house has a lot of trees, shadows, or a busy background in the photo?

The tool is built to isolate the building envelope from the surrounding photo, so trees, shadows, and landscaping in the shot don't get rendered onto the siding or distort the color. For heavily obstructed elevations, we recommend a cleaner secondary angle as a backup during the shoot.

How is this different from the visualizer tools some siding manufacturers already offer online?

Manufacturer visualizers are built around their own product catalog, require homeowners to upload a photo themselves, and are designed to sell that manufacturer's material specifically. This runs in the estimator's hands during the live consultation, works across whatever materials and brands your business actually sells, and is white-labeled to your company instead of pointing homeowners to a manufacturer's site to browse alternatives.

Can we show a homeowner what just the accent wall or gable would look like without re-siding the whole house?

Yes — partial-elevation and accent-only renders are common for homeowners deciding between a full re-side and a lower-cost accent upgrade (like adding board-and-batten gables or a stone water table to existing siding). Showing both options side by side is often what moves someone from the cheaper option to the full job, or vice versa.

Who owns the photos and renderings, and how long are they kept?

That's your call, not ours — it's your software. We build the storage and retention policy around what your business needs, whether that's purging homeowner photos after the job closes or keeping a library of past renders for future marketing, and make sure it meets state consumer-privacy laws like the CCPA or any other regulation that applies to your market. No training on your data, ever.

What does a tool like this cost?

There's no off-the-shelf plan, so there's no published price list. Share your details and we'll discuss project scope and pricing on a free consultation call — see /pricing for details.

Exterior Paint & Finishes

Show homeowners their own house in the siding they're considering — not a sample board.

Photograph the actual elevation. Generate a photorealistic preview in the material, profile, and color the customer is weighing. Close the estimate before the truck leaves the driveway.

Custom-built for your industry · No commitment

BeforeAfter

Drag the slider to compare

What is a siding & cladding preview?

A siding and cladding preview tool takes a photo of a homeowner's actual house and generates a photorealistic rendering of it with a new siding material, profile, or color applied — vinyl, fiber cement, board-and-batten, engineered wood, or stone veneer accents. Instead of a swatch or a stock photo of someone else's home, the homeowner sees their own roofline, trim, and windows with the proposed cladding rendered onto them. Estimators use it during the in-home consultation to compare two or three options side by side and move the homeowner from "I need to picture it" to a signed contract in the same visit.

Why it matters

A full siding re-side runs anywhere from $12,000 to $40,000+ depending on square footage, tear-off, and material — fiber cement and stone veneer accents sit at the top of that range, vinyl at the bottom. That's a five-figure decision homeowners are being asked to make off a 12-inch sample board or a photo of a stranger's house in a brochure, which is exactly why so many estimates end in "let me think about it" and go cold. The tool closes that gap: the estimator photographs the front elevation during the walkthrough, generates the house in the proposed material and color on a tablet or phone, and lets the homeowner see the actual outcome — trim color, shutter contrast, stone accent placement — before they're asked to sign. It doesn't replace the sales conversation; it removes the imagination gap that stalls it.

Who uses this

The estimator or project consultant runs it during the in-home walkthrough, right after measuring the elevations and before writing the quote — it's part of the sales visit, not a separate step. Exterior remodeling companies and siding-specific contractors put it on a showroom tablet so walk-in customers can test colors and profiles against their own house photo instead of a wall of samples. Owner-operators on smaller crews pull it up on a phone during the initial walkthrough, using it to turn a noncommittal homeowner into a signed contract before they get back in the truck.

Heard this from a homeowner mid-estimate?

"I can't tell if that color is going to look washed out against our brick foundation" — sample chips are 3x4 inches under showroom light; nobody can extrapolate that to 1,800 square feet of elevation in their own front-yard lighting.

"Can we see it with the dark trim and NOT the shutters painted to match?" — homeowners want to isolate variables (siding color vs. trim vs. accent stone) one at a time, and flipping through a brochure can't do that on the fly.

"My spouse isn't here — can you send something I can show them tonight?" — the decision-maker who wasn't on-site needs to see the actual house, not describe a swatch number over the phone, or the deal sits until the next visit.

How siding & cladding previews work

Three steps. Under 10 seconds. No design skills needed.

Photograph the elevation

During the walkthrough, the estimator takes a straight-on photo of the front (and any relevant side) elevation — the same shot they'd already take for the measure and quote.

Generate the material on the house

The tool renders the photo with the proposed siding material, profile, and color applied — vinyl lap, fiber cement panel, board-and-batten, or stone veneer accents — matched to the home's actual rooflines, windows, and trim.

Present it before writing the quote

The homeowner compares two or three options side by side on a tablet or phone, right there in the driveway or at the kitchen table, before the estimator finalizes the proposal.

Common questions about siding & cladding

Straight answers. No jargon.

Let's build the version made for your business

Every preview on this site is a variation of the same engine, tuned to one industry. Tell us about yours, and we'll show you exactly what we'd build for it.

We reply within one business day