Can it show different finishes, like white melamine versus a wood-grain laminate?

Yes. Load your finish and material options and the preview renders the actual laminate or melamine pattern the client picks, in the lighting of their own closet — not a swatch chip under showroom lighting.

How is this different from the 3D CAD renderings our design software already produces?

CAD software like 20-20 Design gives you an accurate cut list and a clean render, but it's built from a generic room shell, not the client's actual closet with their wall color, trim, and lighting. This tool starts from a photo of their real space, so the preview looks like their closet, not a showroom model.

Does it account for tight headroom above a bifold or sliding door track?

Yes, because the preview is generated from a photo of the actual opening — door swing, header height, and track clearance are already in the frame, so the result reflects real constraints instead of a drafter's assumed dimensions.

Can I show wire shelving next to solid melamine shelving so the client can compare?

Yes. Generate both in the same closet photo and let the client see the material difference directly, instead of describing it or pointing between two sample boards on the truck.

Does the preview show the closet filled with clothes, or just the empty system?

Both can be scoped. Most consultants use an empty-system preview to keep the conversation focused on layout and finish, but a styled version with hanging garments and folded stacks can be built if that's what closes better for your team.

Can it handle irregular reach-in spaces, like a sloped ceiling or a closet under a staircase?

Yes. Because the preview is generated from a photo of the actual space, sloped ceilings, offset walls, and shallow depths are already accounted for — the system renders around them instead of assuming a standard rectangular bay.

Are photos stored or retained?

That's your call, not ours — it's your software. We build the storage and retention policy around what your business needs and make sure it meets HIPAA, GDPR, or any other regulation that applies. No training on your data, ever.

There's no off-the-shelf plan, so there's no published price list. Share your details and we'll discuss project scope and pricing on a free consultation call — see /pricing for details.

Custom Closet Systems

Show clients their reach-in closet system before the panels are cut

Photograph the empty closet bay during the in-home consultation. Makeover generates a photorealistic preview of your proposed system — their shelving, their finish, their actual walls — in seconds, not a CAD line drawing they have to picture in 3D.

Custom-built for your industry · No commitment

What is a reach-in closet system preview?

A reach-in closet preview tool uses AI to generate a photorealistic image of a proposed custom closet system installed inside a customer's actual closet opening. The designer photographs the empty reach-in bay during the in-home consultation, and the tool renders the shelving, hanging rods, drawer banks, and selected finish directly into that same photo — not a generic CAD elevation or a stock showroom shot. Custom closet companies use this during the sales consultation to get sign-off on layout and finish before the job goes to the CAD drafter for a cut list.

Why it matters

Reach-ins are the volume business for most custom closet companies — a typical bedroom job runs $700 to $3,000 in melamine, versus $4,000 and up for a walk-in, and one consultant can close two or three of them in a single day if the pitch lands on the first visit. The friction isn't the price, it's the gap between a flat CAD elevation and questions like "what does that wood-grain actually look like against my navy walls" or "will the top shelf even be reachable with the bifold track eating my headroom." Every job that ends in "let me think about it" costs a follow-up call and a re-measure, and a real share of those homeowners just go price a PAX system online instead of calling you back.

Who uses this

In-home design consultants at closet franchise operations and independent dealer networks use it on the first visit, right after taking room measurements. Independent millwork and cabinet shops that build reach-ins as one line of their business use it the same way — as a closing tool at the kitchen table, before the job gets handed off to a CAD drafter for the cut list.

Heard this from a client?

You hand them a 2D CAD elevation with dimension lines and they ask what the laminate actually looks like on their wall — a flat drawing with a finish code can't answer that.

They can't tell if double-hang will make the closet feel cramped or if long-hang for coats eats too much floor space, so the layout decision stalls for a week.

The bifold door track only leaves so much header clearance, and they're worried the top shelf will be crammed against it or out of reach — but the elevation never shows that.

How reach-in closet system previews work

Three steps. Under 10 seconds. No design skills needed.

Photograph the empty reach-in bay

During the in-home measure, snap the closet opening on a phone — door frame, header, and existing trim included. No special equipment or lighting rig needed.

AI renders your proposed system into it

Shelving, rod configuration (double-hang, long-hang, or shoe cubbies), drawer banks, and the exact finish they picked get placed into their actual closet photo — not a stand-in room.

Present before you leave the consultation

Get the deposit signed on-site with the layout already approved. The job moves to the CAD drafter and production queue without a second visit to settle finish or configuration.

Common questions about reach-in closet system

Straight answers. No jargon.

Let's build the version made for your business

Every preview on this site is a variation of the same engine, tuned to one industry. Tell us about yours, and we'll show you exactly what we'd build for it.

We reply within one business day