Does the preview show teak going from weathered gray back to its natural golden tone?

Yes. The AI renders the restored teak finish — sanded, oiled, and sealed — while preserving the piece's actual grain pattern and joinery. Customers see their specific table or bench transformed, not a stock teak sample.

Can it preview different powder coat colors on wrought iron and aluminum frames?

Yes. Run the same frame through bronze, black, white, or a custom RAL color and compare them side by side against the customer's actual patio and existing cushions before committing to a coating run.

Does it handle sling and strap replacement previews in different fabric colors?

Yes. Describe the Sunbrella or vinyl strap color and pattern, and the preview shows it applied to the customer's actual chaise, sling chair, or director's chair frame — a real alternative to holding a fabric swatch up to a rusted frame.

Can it show rewoven wicker or resin-weave replacement?

Yes. For cracked or sun-damaged wicker and synthetic resin weave, the AI can preview a rewoven finish in the original or a new weave color, so customers see the full chair or sectional before the reweave is scheduled.

Can it preview new cushion fabric on an existing frame?

Yes. Upload a photo of the piece with its current faded cushions, and the tool shows the same frame with new outdoor-grade fabric — Sunbrella, Outdura, or another marine fabric — in the customer's chosen colorway.

How does this compare to a fabric or finish swatch book?

A swatch is a two-inch sample under showroom lighting. The preview shows the actual finish or fabric applied to the customer's own piece, at scale, next to their patio, deck, or existing furniture — which is what actually closes the estimate.

Are customer photos stored or retained?

That's your call, not ours — it's your software. We build the storage and retention policy around what your business needs and make sure it meets GDPR, CCPA, or any other regulation that applies. No training on your data, ever.

There's no off-the-shelf plan, so there's no published price list. Share your details and we'll discuss project scope and pricing on a free consultation call — see /pricing for details.

Furniture

Show customers their refinished patio furniture before you touch the sander

Photograph the weathered set at drop-off or curbside. Makeover generates a photorealistic preview of the restored piece — new teak oil finish, powder coat color, or sling fabric — in under 10 seconds. Customers see their own furniture transformed, not a stock photo from a finish catalog.

Custom-built for your industry · No commitment

What is a outdoor furniture preview preview?

An outdoor furniture preview tool uses AI to generate a photorealistic image of a patio or garden furniture piece after refinishing, restoration, or reupholstering. The restorer photographs the customer's existing weathered teak, wicker, wrought iron, or cushioned piece, and the tool produces a side-by-side comparison showing the finished result in the customer's chosen stain, powder coat color, or fabric. Furniture restoration shops and patio dealers use this at the estimate stage to convert weathered-set walk-ins into signed restoration orders.

Why it matters

Outdoor furniture restoration runs on a hesitation that new-furniture sales don't have: the customer is comparing a repair estimate against the cost of just replacing the set. Teak restoration typically runs $150–$400 per chair or $600–$1,500 for a full dining set; powder coating a wrought iron or aluminum frame runs $150–$300 per piece; sling and strap replacement runs $40–$80 per chair; cushion reupholstery in marine-grade fabric runs $80–$200 per cushion. Against a $3,000–$6,000 replacement set, customers stall on whether refinishing is worth it — they can't picture the outcome from a fabric swatch or a finish sample chip. A preview of their exact piece, restored, turns that math into a visual decision instead of a guess.

Who uses this

Furniture restoration and refinishing shops specializing in teak, wicker, and wrought iron. Patio furniture retailers who offer refinishing or restringing as an add-on service alongside new sales. Powder-coating shops that handle outdoor furniture frames alongside railings and gates. Upholsterers who cut and sew replacement slings, straps, and cushions in outdoor-grade fabric.

Heard this from a customer?

They ask whether their gray, weathered teak table will really come back to a warm honey tone, or if refinishing is just throwing money at a set they should replace.

You hand them a Sunbrella swatch card for the sling replacement, and they hold a two-inch fabric square up to a rusted chaise frame and still can't picture the finished chair.

They're deciding between three powder coat colors for the wrought iron frames and won't commit without seeing the color against their actual patio and existing cushions.

How outdoor furniture preview previews work

Three steps. Under 10 seconds. No design skills needed.

Photograph the weathered piece

Shoot the faded teak, rusted frame, or torn sling on-site or at drop-off. Whatever condition it's in — sun-bleached, cracked, corroded — the AI works from the actual piece, not a clean reference.

AI generates the restoration preview

The model applies the new teak oil finish, powder coat color, resin weave, or sling and cushion fabric to the customer's own frame, matching wood grain, weave pattern, and material sheen.

Present at the estimate

Their own chair or table, before and after, on your tablet during the walkthrough or at the drop-off counter. The restoration order gets signed on the spot instead of "let me think about it."

Common questions about outdoor furniture preview

Straight answers. No jargon.

Let's build the version made for your business

Every preview on this site is a variation of the same engine, tuned to one industry. Tell us about yours, and we'll show you exactly what we'd build for it.

We reply within one business day