Can the preview show different flake blends and broadcast densities?

Yes. Run the same garage photo through multiple flake colorways — full broadcast, partial broadcast, or a solid-color polyaspartic finish — so the homeowner compares density and blend options on their own slab instead of guessing from adjacent sample chips.

Does it account for the condition of the existing concrete?

The AI works from the photo you capture, including visible cracks, pitting, and staining. It shows the coated result over that actual surface condition, which is useful for setting expectations about what grinding and crack-chasing prep will and won't fully hide.

How is this different from the visualizer tools some coating manufacturers offer?

Manufacturer visualizers apply a flake pattern to a generic stock garage. This tool generates the preview on the customer's own slab, from a photo you take on-site — their dimensions, their lighting, their stains — which is what actually moves a bid forward.

Can it show metallic epoxy effects, not just flake systems?

Yes. Metallic polyaspartic and epoxy finishes with their characteristic marbled, three-dimensional color movement can be generated as a preview style. It's a popular option for showroom floors and garages homeowners treat as a finished living space.

Do we need to clear the garage out before photographing the floor?

No. Photograph the slab as it sits — parked car, storage bins, tools along the wall. The AI reads the visible floor area and generates the coated preview around what's there, so you're not asking the homeowner to empty a garage just to get a usable image on the estimate visit.

Can I generate previews for a whole shop or commercial space, not just a residential garage?

Yes. The same workflow applies to workshop floors, retail showrooms, and warehouse bays. Larger commercial spaces benefit even more from a preview, since the material and labor commitment is proportionally larger and harder to picture from a sample chip alone.

Are photos stored or retained?

That's your call, not ours — it's your software. We build the storage and retention policy around what your business needs and make sure it meets HIPAA, GDPR, or any other regulation that applies. No training on your data, ever.

What does this cost to add to our sales process?

There's no off-the-shelf plan, so there's no published price list. Share your details and we'll discuss project scope and pricing on a free consultation call — see /pricing for details.

Flooring

Show homeowners their own garage floor in the flake blend, not a sample chip

Photograph the existing slab — stains, cracks, and tire marks included. Makeover generates a photorealistic epoxy floor preview in under 10 seconds, so the homeowner sees their actual garage transformed before you leave the estimate on the counter.

Custom-built for your industry · No commitment

BeforeAfter

Drag the slider to compare

What is a epoxy garage floor preview?

An epoxy garage floor preview tool uses AI to generate a photorealistic image of what a customer's actual garage floor will look like after epoxy or polyaspartic coating installation. The installer photographs the existing concrete slab, and the tool produces a side-by-side comparison showing the chosen base color, flake blend, and topcoat sheen applied to that specific floor — cracks, oil stains, and expansion joints included. Epoxy flooring contractors use this during the in-home estimate to close the sale before the homeowner collects a second or third bid.

Why it matters

A two-car garage epoxy job typically runs $1,500 to $4,500 for a basic flake system and $4,000 to $8,000+ for a full-broadcast metallic polyaspartic build — and homeowners almost never sign on the first bid. They collect three quotes as a matter of course, because the material is unfamiliar and the failure mode (a peeling DIY kit floor from a neighbor's garage) is a known horror story. The entire sales conversation happens around a 3x5-inch flake sample chip while the homeowner tries to mentally scale it across 400+ square feet of stained, cracked concrete under fluorescent shop light. That gap between the chip and the room is exactly where a $3,000 ticket turns into "we need to think about it" — and a homeowner who never calls back.

Who uses this

Epoxy and polyaspartic flooring installers who run their own in-home estimates. Garage floor coating franchise reps closing on the first visit without a separate design appointment. General contractors and concrete companies who added epoxy as an upsell line item and need to sell the aesthetic as convincingly as a dedicated flooring specialist. Polished concrete and industrial coating crews pitching showroom or workshop floors to small business owners.

Heard this from a homeowner?

They hold a flake sample chip against their oil-stained slab and say "I can't picture this covering the whole garage."

They ask if the coating will actually hide their cracks and old tire stains, and a sample chip has no answer for that.

They say "let us get one more quote" and you know the next contractor is about to show them the same chip.

How epoxy garage floor previews work

Three steps. Under 10 seconds. No design skills needed.

Photograph the existing slab

One phone photo of the garage floor as it sits today — stains, hairline cracks, and control joints included. No need to sweep or stage it first.

AI generates the coated floor preview

The model applies the chosen base color, flake broadcast density, and topcoat sheen across the actual slab, following its real dimensions, joint lines, and floor drain.

Present it on the estimate visit

Their own garage, coated, on your tablet before you leave the driveway. The homeowner signs against a picture of their floor, not a chip in their hand.

Common questions about epoxy garage floor

Straight answers. No jargon.

Let's build the version made for your business

Every preview on this site is a variation of the same engine, tuned to one industry. Tell us about yours, and we'll show you exactly what we'd build for it.

We reply within one business day