Does the preview handle compound curves and hull flare, not just flat panels like a car door?

Yes. Hulls are compound-curved from the bow flare to the transom, unlike the mostly flat panels on a vehicle wrap job. The model renders the wrap following the actual sheer line, chine, and curvature of the boat in the photo, so a two-tone design breaks where it would really break on that hull, not where it would on a flat mockup.

Can I preview partial wraps — waterline stripes, transom graphics, sponson accents — not just full hull wraps?

Yes. Most wrap jobs on the water are partial coverage: a waterline stripe package, a transom logo, console accents, or pontoon log wraps. You can generate a preview for any coverage area, from a single accent stripe to a full topsides wrap.

Does it account for hardware — cleats, rub rails, swim platforms, thru-hull fittings — when it renders the wrap?

Yes. The AI reads the deck hardware and trim visible in the photo and wraps around cleats, rub rails, hawse pipes, and thru-hull fittings the way an installer actually would, instead of laying a flat color block over the whole hull and ignoring what's mounted on it.

Can it show custom graphics, dealer logos, or flame and camo patterns, or only solid colors?

Both. Solid color changes and metallic or satin finishes are the most common request, but the tool also renders custom graphic packages, dealer branding, and patterned wraps like flame jobs or camo — useful for showing a buyer exactly how a logo or graphic will sit across the hull's curves before it's cut.

Can this help a customer compare a vinyl wrap against a gelcoat repaint like Awlgrip?

Yes, and that comparison is often the real sale. A wrap runs a fraction of the cost and time of a full Awlgrip or gelcoat respray, but owners weighing the two want to see both outcomes on their own boat before they commit to a multi-week paint job versus a wrap install measured in days.

Can I run this at a boat show or in a parking lot, not just back at the shop?

Yes. Any photo works — a phone shot on the dock, at a boat show booth, or with the boat up on a trailer in a parking lot. You don't need studio lighting or the boat back at your facility to generate a preview a customer can approve on the spot.

Are boat and customer photos stored or retained?

That's your call, not ours — it's your software. We build the storage and retention policy around what your business needs and make sure it meets GDPR, CCPA, or any other regulation that applies. No training on your data, ever.

What does a boat wrap preview build cost?

There's no off-the-shelf plan, so there's no published price list. Share your details and we'll discuss project scope and pricing on a free consultation call — see /pricing for details.

Marine

Show boat owners the finished wrap before the vinyl ever touches the hull

Photograph the boat dockside or on the lift. Makeover generates a photorealistic wrap preview across the actual hull curves in under 10 seconds — not a stock cruiser pulled from a wrap manufacturer's brochure.

Custom-built for your industry · No commitment

What is a boat wrap preview preview?

A boat wrap preview tool uses AI to generate a photorealistic image of a vessel wrapped in a chosen vinyl color, finish, or graphic pattern before any material is cut. The installer photographs the boat's actual hull, and the tool renders the wrap across its specific curves, waterline, and hardware layout rather than showing a generic stock boat. Marine wrap shops, dealerships, and yacht brokers use this dockside, in the showroom, or at the boat show to lock in color and design sign-off before ordering vinyl.

Why it matters

A full hull wrap on a 24-to-30-footer typically runs $4,000 to $10,000; wrap a 40-footer and that climbs well past $15,000. That's real money to commit sight-unseen, and it puts a wrap in direct competition with a $20,000-plus Awlgrip or gelcoat repaint inside the owner's head. A car can sit undecided in a driveway for free; a boat can't. Once you've booked a travel lift and a haul-out slot, every day it sits on stands undecided costs the yard bay space and the owner slip fees on a boat they can't use. A shop that can show the owner their own boat in two or three finish options before the haul-out closes that decision in one visit, instead of watching it drift across an entire boat show season.

Who uses this

Marine wrap and graphics installers running the color and finish conversation before cutting a single panel of vinyl. Boat dealerships wrapping trade-in and demo inventory to move used boats faster and to stand out on the boat show floor. Yacht brokers using a wrap preview to show a buyer what a dated hull looks like refreshed, ahead of listing or closing a sale. Marine canvas and sign shops that added hull wrapping to their service line and need more than a swatch book to sell against a gelcoat respray.

Heard this from a boat owner?

A customer wants to go from white gelcoat to a two-tone metallic wrap, and you're holding a 4x6 vinyl swatch next to a 32-foot hull — they can't extrapolate a paint chip to compound curves and a waterline.

You pull up photos from a wrap job on someone else's boat. They say "that's a different hull shape, mine has more flare at the bow" — and they're right, it doesn't translate.

They want to "check with their marina neighbor" or their co-owner before committing, and by the time they come back the haul-out slot you held is gone and you're rebooking the yard for next month.

How boat wrap preview previews work

Three steps. Under 10 seconds. No design skills needed.

Photograph the hull

Dockside, on the trailer, or up on stands at the yard. Any angle that shows the topsides and waterline works — no studio or haul-out required.

AI generates the wrap preview

The model wraps the boat's actual hull curves, sheer line, and waterline in the chosen color, finish, or graphic pattern, working around cleats, rub rails, and thru-hull fittings instead of ignoring them.

Present it dockside or at the booth

Their own boat, wrapped, on a tablet or phone — before you've ordered a roll of vinyl or booked the yard's install bay.

Common questions about boat wrap preview

Straight answers. No jargon.

Let's build the version made for your business

Every preview on this site is a variation of the same engine, tuned to one industry. Tell us about yours, and we'll show you exactly what we'd build for it.

We reply within one business day